Part of Xiaomi guides, 2023 guides.

Let me guess how this went. You were on a custom ROM, things were fine for a

while, then one small thing started bothering you — a bank app refusing to open,

a camera that's a step behind stock, or just that itch to go back to something

that simply works. So now you are staring at a phone running something you want

gone, wondering if going back to stock means a weekend of Fastboot commands.

It does not. This method is short. It is also unforgiving about one single thing:

where the files sit. Get that right and the whole job is a double-click.

What you actually need

• The fastboot ROM for your exact model. Not the recovery package — this

method needs the fastboot one, and they are not the same download.

• Platform Tools (adb + fastboot) extracted on your PC.
• The ADB and Fastboot driver installed, so Windows actually sees the phone.

If Device Manager shows an unknown device, stop here and fix that first.

• A cable that is not falling apart, and a battery above 50%.
• Twenty minutes where you can leave the phone plugged in and alone.

That fourth point sounds like a joke. It isn't. Most "this ROM bricked my phone"

stories are actually a cable that dropped mid-flash.

Step 1 - take the fastboot package, not the recovery one

Go to the link below for your model and download the fastboot ROM. These packages

are big, usually a few gigabytes, and they contain the flash scripts plus the raw

images. If the file you downloaded ends up being a small recovery zip with an

updater-script inside and no .bat files, you picked the wrong one. Go back and

take the other one.

Match the model exactly. A ROM for another variant will flash happily and then

leave you with a phone that boots to a black screen, and that is a much longer

evening.

Step 2 - extract it properly and drop the platform tools in

Extract the ROM zip into a folder you can find again, something like

C:\miui\. Use 7-Zip or WinRAR — not the built-in Windows extractor, which

sometimes flattens the structure and gives you a folder full of loose files.

If the extracted folder has no flash_all.bat inside, the extraction went wrong.

Now copy the contents of your platform tools folder — adb.exe,

fastboot.exe and the DLLs next to them — into that same ROM folder. They have

to sit beside the images and the script, not in a subfolder. This is the step

people skip, and it is exactly why the script opens a black window and vanishes

before you can read a single line.

Step 2b - a quick sanity check before you commit

Open a command window in that folder and run:

fastboot devices

Nothing connected yet, so you should just get an empty line and no error. If it

says "fastboot is not recognized", the tools are in the wrong place. Fix that now

rather than halfway through a flash.

Step 3 - fastboot mode, and make sure the PC sees the phone

Power the phone off. Hold Volume Down + Power until you see the fastboot

screen — usually the bunny logo with text, no MIUI. Plug it into the PC and run:

fastboot devices

This time it must print a long serial number and the word fastboot. No serial

number means the driver is missing, and no amount of retrying the script will fix

that. Sort the driver out first.

Step 4 - run the script and then keep your hands off it

Inside the ROM folder you will see several files. The one you want is

flash_all.bat. Right-click and run it as administrator. A black window opens

and starts printing partition names: super, boot, vbmeta, and so on. Some

lines take a while. That is normal.

Do not unplug the cable. Do not close the window. Do not tap the phone to see if

it is alive. When the script is done the phone reboots on its own into a clean,

first-boot MIUI, and the setup wizard appears.

Where this usually goes wrong

• Wrong package. A recovery ROM does not contain what this method needs.

It has to be the fastboot build.

• Broken folder structure. Extract with 7-Zip or WinRAR so the subfolders and

the .bat files stay where the script expects them.

• A dead USB port or a flaky cable. If the window starts and then dies at

super, that is usually the connection, not the ROM.

Things people ask before starting

A full fastboot flash resets the phone. Everything on internal storage goes,

so move your photos off first. The standard script leaves the bootloader

unlocked, so you can keep flashing later if you want. And no, you do not need

Mi Flash Tool, which is the whole point of doing it this way.

If the driver side of this feels like the annoying part, the free Rom Flasher

tool on GitHub bundles the ADB and fastboot driver install into a couple of

clicks so you are not hunting Device Manager. It is free, and the link is in the

downloads section.

One last thing. Do a full boot and finish the setup wizard before you start

restoring anything. If something is going to break, you want it breaking on an

empty phone, not on top of two hours of restored files.

Full description from the video

How to come back from any AOSP ROM or MIUI mod to official MIUI — the fastboot package, the folder trick, and one script that does the whole job.

So you've been running an AOSP ROM or a modded MIUI build and now you want stock back. The good news: you don't need Mi Flash Tool or a complicated setup. A fastboot ROM, platform tools and one script are enough — you just have to put the right files in the right folder first. Get that part wrong and the script closes before doing anything, which is where most people give up and assume it's broken.

🛠️ What You Need

• The fastboot ROM for your exact device — not the recovery package
• Platform Tools extracted on your PC
• The ADB and Fastboot driver installed so the phone is actually detected
• A charged battery and a cable that isn't falling apart

📝 Steps

1. Download the fastboot ROM for your model.
2. Extract the zip. Inside are the flash scripts and the images.
3. Copy the platform tools files into that same folder.
4. Boot the phone into fastboot and plug it in.
5. Run the flash script and leave the phone alone until it finishes.
6. It reboots on its own into a fresh MIUI install.

⚠️ Where People Get Stuck

• Grabbing the recovery ROM. It doesn't contain what this method needs — always take the fastboot package.
• Extracting with a tool that breaks the folder structure, so the script can't find the images.
• Unplugging early. Fastboot flashing has no patience for that.

❓ Common Questions

• Does this wipe my data? Yes, a full fastboot flash resets the phone to stock.
• Will it lock my bootloader again? The standard script leaves it unlocked.
• Do I need Mi Flash Tool? No — this method exists so you don't have to.
• Can I flash another model's ROM? No. Match the ROM to your exact device.

Common questions

More guides like this