Part of POCO guides, HyperOS guides, 2026 guides.

If your POCO X7 Pro is sitting in a bootloop, or dead after a bad flash, this is the kind of build that walks you back to a working phone. It is modded HyperOS, based on 3.0.3.0 WOJCNXM, and it installs through a script rather than a long line of commands you have to type one at a time.

It is also just a good customised HyperOS build. Here is what is inside it and how the install actually goes.

What is in it

• Full read-write access for product, system, system_ext and odm, so you can modify parts of the system that are usually locked down.
• Performance tweaks plus a thermal mod baked into the build.
• All languages, with 60, 90 and 120 Hz display support.
• New wallpapers and themes, an enhanced Gboard keypad and Core Patch.
• Unlimited Google Photos storage, a game spoof, and KaoriToolBox preinstalled.
• A debloated system with modded launcher, theme, security and SystemUI apps.
• Built on the latest firmware base, 3.0.8.0 GL.

What you need

• The Robinhood OS package for the POCO X7 Pro. It is built for rodin and nothing else.
• A PC with working ADB and fastboot, and the driver installed.
• An unlocked bootloader and fastboot access.
• Over 50% battery, and a backup. This is a clean flash and everything on the phone goes.
• Twenty quiet minutes where the phone can stay plugged in.

Step 1 - download and unpack on the PC

Grab the package from the link in the downloads section and unpack it on your PC with 7-Zip or WinRAR. You are looking for a folder that contains the installer and the image files. Do not run anything from inside the zip. Extract it first.

Step 2 - boot the phone to fastboot

Power the phone off and hold Volume Down + Power until you see the fastboot screen, then connect it to the PC and confirm it is visible with fastboot devices. No serial number means the driver is missing, and the script will not fix that for you.

Step 3 - run the installer

In the unpacked folder, run the installer script as administrator. A black window opens and starts printing what it is doing. Some lines take a while. That is normal, so leave it alone.

Step 4 - press Y for a clean flash

When it asks, choose the clean flash. Always clean, never dirty, especially if you are coming off a bootloop or another ROM. A dirty flash on top of a broken system tends to keep the broken part.

Step 5 - pick your root

The installer asks what you want, and you answer with a number:

• 1 for Magisk
• 2 for KernelSU
• 3 for Apatch
• 4 for no root

This is a nice touch. You do not have to finish the flash and then go hunting for a separate root guide.

Step 6 - let it finish

Leave the cable in and the window open. When the script is done the phone reboots on its own. First boot after a clean flash takes a few minutes, and there may be one extra reboot along the way.

Where people get stuck

• Choosing a dirty flash to save time. On a bootloop, that is the wrong call and it usually keeps the problem.
• Using a lock script or otherwise relocking while experimenting. Keep it unlocked until you are settled.
• Flashing to a different model. This package is for the POCO X7 Pro. It is not for another Xiaomi or POCO phone.
• A flaky cable or port. If the window dies partway through a partition, suspect the connection before you blame the ROM.

Honest notes

One payment app simply refused to work on this build in my testing, and I show that rather than pretending everything was perfect. On my unit the device passed its integrity checks and banking apps generally co-operated, but one did not, and that is the reality of a modded system.

Because it is a clean flash, everything on the phone goes. Have a backup. Finish the setup wizard on the empty phone before you start restoring files, so if something is going to break you find out early.

If you want an unbrick route that does not need typing, the free Rom Flasher tool includes an unbrick center and the ADB and fastboot driver install. It is free, and the link is in the downloads section.

Full description from the video

HyperOS 3.0.3.0 CN Dragonhood on the POCO X7 Pro (rodin) — the Robinhood OS build, flashed the Fastboot way, with a proper look at what's inside.

If your POCO X7 Pro is stuck in a bootloop or sitting there dead after a bad flash, this is the video that walks you back to a working phone. The build is modded HyperOS with a lot of customisation baked in, and it installs through a script, so there's no long line of manual commands to memorise.

📱 Device : POCO X7 Pro (rodin)

🧩 ROM : Robinhood OS — HyperOS 3.0.3.0 CN Dragonhood (Android 16)

📦 Build : 25 Jan 2026

👤 Credited : @NaderMagdy0 · based on HyperOS 3.0.3.0 WOJCNXM

🎯 What It Does

• Full RW for product, system, system_ext and odm
• Performance tweaks plus a thermal mod
• All languages, with 60 / 90 / 120 Hz support
• New wallpapers and themes, Gboard enhanced, Core Patch
• Unlimited Google Photos, game spoof, KaoriToolBox preinstalled
• Debloated system with modded launcher, theme, security and SystemUI apps
• Built on the latest firmware base (3.0.8.0 GL)

💡 Best Part

You pick your root during setup instead of hunting for a separate guide — Magisk, KernelSU, Apatch or nothing at all. And on my unit the device passed its integrity checks, so banking apps generally co-operated.

🚫 What It Doesn't Do

One payment app simply refused to work on this build, and I show that instead of pretending everything was perfect. It's also a clean flash, so everything on the phone goes.

📝 Flashing Steps

1. Download the ROM and unpack it on your PC.
2. Boot the phone into Fastboot mode and connect it.
3. Run the installer script (Robinhood_os_installer.bat).
4. Press Y for a clean flash — always clean, never dirty.
5. Pick your root: 1 Magisk, 2 KernelSU, 3 Apatch, or 4 for no root.
6. Let it run. The phone reboots on its own when it's finished.

Common questions

More for POCO X7 Pro