Part of POCO guides, HyperOS guides, 2025 guides.

You saw the Moto My OS port running on a POCO X7 Pro and it looks nothing like HyperOS. Different launcher, different icons, different feel entirely. Now you want it on your phone and you want to know what you are getting into.

I will be straight with you, because this is the kind of ROM where honesty saves you an evening. A port is not built for your phone. Someone took Moto firmware, made it boot on the POCO X7 Pro, and that is what you are flashing. The reward is a phone that feels new. The cost is that it is only as stable as the person who built it.

What this actually is

A Moto-flavoured ROM, ported to the POCO X7 Pro. Unofficial. The look and feel are the entire point — it is a completely different phone experience from HyperOS, and that is why people try it.

The package is AOSP-based, which is the detail that decides most of the steps below. An AOSP-based package needs vbmeta handled before the ROM goes on. Skip that and the phone refuses to boot, and it looks exactly like a broken package when it is not.

What you need before you start

• A POCO X7 Pro with an unlocked bootloader.
• The Moto My OS port package from the link on this page. The exact one.
• Platform tools extracted on your PC.
• A recovery built for your model. Not another device's recovery.
• The vbmeta file for an AOSP-based ROM.
• The ADB and Fastboot driver installed, so Windows sees the phone.
• A complete backup, because a port flash wipes everything.

Step 1 — back up all of it

All of it, off the phone. Photos, documents, chat backups, everything you would miss. A port flash formats storage, so anything still on the phone when you start will be gone when you finish.

Step 2 — get the PC ready

Install platform tools and the ADB and Fastboot driver. Boot the phone into fastboot mode and confirm the PC sees it. If Device Manager shows an unknown device, fix the driver now rather than halfway through a flash.

Step 3 — flash vbmeta first

This comes before the ROM, and it is not a step you can reorder. The package is AOSP-based, so vbmeta has to be handled first. Do it in the order your port's guide gives, and do not skip it because a different ROM you flashed last year did not need it.

Step 4 — flash the port package in order

Flash the Moto My OS package in the order shown. If the package includes a vendor-side step before the ROM, that order exists for a reason. Let each command finish before the next one starts, and do not unplug the cable because a line took thirty seconds.

Step 5 — reboot into recovery and format data

Reboot into recovery and format data. This is not optional on a port. Flash a port over old data and you get a bootloop, and then you spend two hours blaming the package instead of the missing format.

Step 6 — boot to system and give it time

Boot to system. The first boot on a port is slow, noticeably slower than a normal ROM. Give it several minutes on the logo before you start worrying. When it comes up, let the phone sit idle for a while before you install anything.

Where people get stuck

• Flashing without vbmeta. The phone will not boot and it looks like a broken download. It is not. Handle vbmeta first for this AOSP-based package.
• The wrong recovery. A recovery built for a different device is a fast way to a bad evening. Get the one for your model.
• Expecting stock stability. A port can carry camera quirks, calling bugs and sensor oddities. That is the nature of adapted firmware, and no guide can promise around it.

An honest note

Ports are the fun end of custom ROMs and the least predictable. You might get a daily driver you love, or you might find one thing that annoys you enough to go back. Both outcomes are normal.

So do not put this on a phone you need for work tomorrow. Keep your backup, keep the official HyperOS package downloaded so you can go back with a fastboot flash, and try it when you have an evening to spare.

If the driver and fastboot part is what usually slows you down, the free Rom Flasher tool on GitHub bundles the ADB and fastboot driver install into a couple of clicks. It is free, and the link is on this page.

Full description from the video

Moto My OS ported onto the POCO X7 Pro — a Moto-flavoured ROM flashed step by step. Here's the order, the files you need, and the parts that usually go wrong.

Ports are the wild side of custom ROMs. Someone took a Moto firmware, made it boot on the POCO X7 Pro, and that's what you're flashing here. What you get is a completely different look and feel from HyperOS. What you don't get is a promise of perfection: a port is only as stable as the person who built it, so back up first and don't expect every camera feature or sensor to behave exactly like stock. vbmeta matters here too, since this package is AOSP-based.

📱 Device : POCO X7 Pro

🧩 ROM : Moto My OS (port, unofficial)

🛠️ What You Need

• POCO X7 Pro with an unlocked bootloader
• The Moto My OS port package from the link below
• Platform tools, a recovery built for your model, and the vbmeta file for an AOSP-based ROM
• ADB and Fastboot driver installed on your PC
• A complete backup, because a port flash wipes everything

📝 Steps

1. Back up your data. All of it, off the phone.
2. Install platform tools and the ADB Fastboot driver on the PC.
3. Boot the POCO X7 Pro into fastboot mode.
4. Flash vbmeta before the ROM — AOSP-based packages need it handled first.
5. Flash the Moto My OS port package in the order shown in the video.
6. Reboot into recovery and format data.
7. Boot to system. The first boot on a port is slow, so give it time before you panic.

⚠️ Where People Get Stuck

• Flashing a port without vbmeta. The phone refuses to boot and it looks like a broken package.
• Using a recovery built for a different device. Get the one for your model.
• Expecting stock stability. Ports can carry camera quirks, calling bugs and sensor oddities.

Common questions

More for POCO X7 Pro