POCO X7 Pro + InfinityX 3.7 Android 16 QPR2 Gaming Test
Part of POCO guides, HyperOS guides, 2026 guides.
I tested InfinityX 3.7 on Android 16 QPR2 on the POCO X7 Pro with BGMI at Extreme FPS, COD Warzone Mobile, a heating check, battery drain and an AnTuTu run. For smoothness and features it beats the stock ROM. For the boring reliability of a factory build, stock still wins.
The video starts muted so it does not blast at you — tap the speaker to hear it, or open it on YouTube.
The question I started with was plain. Is InfinityX better than the ROM that came on the phone, and is it safe to keep as a daily driver? A gaming test answers a lot of that on its own, because games are where a phone either holds up or shows you exactly where it gives in.
The flash is the usual fastboot route, so this is not an install for someone without a PC. Once it is on, though, the interesting part is what the build does under load.
How I tested it
I did not poke at the settings to make anything look better. What is on screen is what the build does as it comes, including the parts where it does not look great.
- BGMI at Extreme FPS, watched for stability across a session rather than one peak frame rate.
- COD Warzone Mobile, the heavier of the two loads.
- A heating check after a long session.
- Battery drain while gaming.
- An AnTuTu run on this build, since people always ask.
- Stability and bugs across the whole session.
What the frame rate actually tells you
Frame rate is the easy part to show and the least useful part on its own. Any phone will hold its frame rate for the first ten minutes. A QPR2 build on this hardware feels great while it is cool.
The second half of a session is what tells you the truth. That is where a phone decides whether to hold its clocks or start easing them down to protect itself. I watched the whole session rather than grabbing one peak number off the screen.
Heat and battery
These are the two things that decide whether you still like the ROM next week, so they got the longer look.
A long session warms the phone up. That is normal on this hardware and not unique to InfinityX. The question is what the ROM does about it, and how the games feel once the phone is warm.
Battery drain while gaming follows from that. Every watt the chip burns comes out of your battery, and a build that runs at high clocks for longer will be faster and drain harder. That trade exists on stock too. It is just measured differently.
The AnTuTu run is in the video if you want a number to compare against your own phone. Judge it alongside the heat and battery, not instead of them.
What is not perfect
I did not hide the rough moments. Across the session there are points where things do not look brilliant, and those are in the footage rather than cut out.
That is what a real gaming test looks like on this hardware. A QPR2 build on a mid-range phone will feel great while it is cool, and the second half of a long session is where you see the trade you are making.
Is it better than stock?
For smoothness and features, yes. InfinityX gives you more to work with and feels quicker in general use.
For the boring reliability of a factory build, no. Stock is tested for months and updated in a way a community ROM is not. That is the deal with every custom ROM, and it is worth saying out loud instead of pretending the choice is free.
Who should install it
Install it if you play in short bursts and you want the extra features. Bursts are exactly where a QPR2 build shines, because the phone is cool and running at full speed.
Think harder if your sessions run long. Long sessions are where thermals and battery become the trade you are making, and no amount of tuning removes that on this hardware.
Either way, this needs a PC and the usual fastboot route. Keep a backup, and if you are not comfortable flashing, stay on stock. There is no shame in a phone that just works.
If the driver and tools setup is the slow part, the free Rom Flasher tool on GitHub installs the ADB and fastboot driver in a couple of clicks, so you can get the phone into fastboot without a Device Manager hunt. It is free, and the link is in the downloads section.
Links / Downloads
- InfinityX 3.7 — https://tmearn.net/link/7MXAVC0l
- Rom Flasher tool (free) — https://github.com/romflasher3419-spec/rom-flasher-tool/releases/latest
- Termux flash file — https://tmearn.net/link/lQ5Lhx2G
- ADB & Fastboot tool — https://tmearn.net/link/8kQcy
- ADB & Fastboot driver — https://tmearn.net/link/PSM2
Use the file built for your exact model and region. A package for another variant is the quickest way to a phone that will not boot.
Full description from the video
InfinityX 3.7 on Android 16 QPR2, running on the POCO X7 Pro (Rodin) — BGMI at Extreme FPS, COD Warzone Mobile, a heating check, battery drain and an AnTuTu run in one honest pass.
The question I started with was simple. Is InfinityX better than the stock ROM, and is it safe to keep as a daily driver? A gaming test answers a lot of that on its own. Frame rate is the easy part to show. Heat and battery are the parts that decide whether you still like the ROM next week, so those got the longer look.
I didn't poke at the settings to make anything look good. What's on screen is what the build does as it comes, including the moments where it doesn't look brilliant. That's the only kind of test worth filming.
📱 Device : POCO X7 Pro (Rodin)
🧩 ROM : InfinityX 3.7
🤖 Android : 16 (QPR2)
🔬 What Was Tested
- BGMI at Extreme FPS, watched for stability rather than one peak number
- COD Warzone Mobile, the heavier of the two loads
- Heating check after a long session
- Battery drain while gaming
- AnTuTu run on this build
- Stability and bugs across the whole session
- Whether it's realistic as a daily driver
📊 Verdict
Here's the honest way to read a test like this: a QPR2 build on this hardware will feel great while it's cool, and the second half of a session is what tells you the truth. If you play in short bursts, you'll like it. If your sessions run long, thermals and battery are the trade you're making.
Is it better than stock? For smoothness and features, yes. For the boring reliability of a factory build, no. That's the deal with every custom ROM, and it's worth saying out loud.
❓ Common Questions
- Is it safe for daily use? For most people, yes — keep a backup anyway.
- Does it need a PC? The usual Fastboot route, so yes.
- Which games were tested? BGMI at Extreme FPS and COD Warzone Mobile.
- Is there a benchmark? Yes, an AnTuTu run is in the video.
Common questions
Is InfinityX 3.7 good for gaming on the POCO X7 Pro?
Yes for short sessions. It feels quick and smooth while the phone is cool. On longer sessions, thermals and battery drain become the trade you are making, the same as any build on this hardware.
Do I need a PC to install InfinityX 3.7?
Yes. It uses the usual fastboot route, so you need a computer with ADB and Fastboot and the driver installed.
Is InfinityX 3.7 safe as a daily driver?
For most people, yes. Keep a backup and treat the first week as a test, because it is a community build without an official update path like stock has.
Which games were tested?
BGMI at Extreme FPS and COD Warzone Mobile. The heavier load was Warzone Mobile, and both were watched across a full session rather than for a single peak number.
Is there a benchmark result?
Yes, an AnTuTu run was included on this build. Read it together with the heating and battery results rather than on its own, since a single score does not tell you how the phone behaves over time.
Before you flash
- Back up everything you would miss — unlocking and flashing usually wipe the phone.
- Check the file is built for your exact model and region.
- Keep a PC and a working cable around so a bootloop can be recovered.
More for POCO X7 Pro
Root POCO X7 Pro With Magisk No TWRP Needed — Full Steps
Rooting the POCO X7 Pro with Magisk — no TWRP, no custom recovery, just a patched boot image and a couple of fastboot commands.
TWRPPOCO X7 ProInstallPOCO X7 Pro · 12 Oct 2025HyperOS 3.0 for POCO X7 Pro Official Build Flash & First Look
HyperOS 3.0 for the POCO X7 Pro — the official build, what's inside, and the clean way to get it running on your phone.
HyperOSPOCO X7 ProFlashPOCO X7 Pro · 3 Oct 2025Project Infinity X 3.3 on POCO X7 Pro Android 16 Sideload Guide
Project Infinity X 3.3 on the POCO X7 Pro (Rodin) — an Android 16 build flashed with vendor_boot and ADB sideload, plus the known issues you should read...
POCO X7 ProPOCO X7 Pro · 20 Oct 2025HyperOS 3 for Xiaomi Pad 5 Official Build Download & Flash
HyperOS 3 is available for the Xiaomi Pad 5 as an official build — here's how to download it and get it onto the tablet.
HyperOSXiaomi Pad 5FlashXiaomi Pad 5 · 2 Oct 2025HyperOS 4 on POCO X7 Pro Install & Review Without PC, No Termux
HyperOS 4 RODIN Edition on the POCO X7 Pro (rodin) — I install it, boot it and go through the whole thing: what's new, how it feels and whether it's worth...
HyperOSPOCO X7 ProFlashPOCO X7 Pro · 8 Sep 2026PixelOS Android 15 on POCO X7 Pro Flash Without Errors
PixelOS with the latest Android 15 build is running on the POCO X7 Pro — this is the full flash, from vendor_boot to first boot, done without any errors.
PixelOSPOCO X7 ProFlashPOCO X7 Pro · 25 Sep 2025