Part of POCO guides, HyperOS guides, 2025 guides.

If you have had the same launcher and the same notification shade for two years, this is the flavour of change a port ROM gives you. HiOS is Tecno software running on your POCO X7 Pro. Different app drawer, different control centre, different set of stock apps sitting next to Google's. In your hand it does not feel like the phone you have been using.

That is the appeal. The catch is that ported ROMs are fussier than a normal custom ROM. The install itself is not hard, but ports expect a clean start and they punish anyone who rushes the setup. Here is the order that works.

What this port brings

• The HiOS launcher and app drawer instead of HyperOS.
• A different control centre and notification layout.
• Tecno's stock apps alongside the Google ones.
• A genuinely fresh feel for anyone bored of the usual Xiaomi software.

What you need

• A POCO X7 Pro with an unlocked bootloader.
• ADB and fastboot on your PC, with drivers installed and the phone detected.
• Platform Tools extracted and ready.
• A custom recovery built for this device, TWRP or OrangeFox.
• The vbmeta file for AOSP-based builds if your package asks for it.
• A full backup and a battery that is not nearly empty.

Do not skip the recovery step. A port like this usually wants to be installed from recovery, and installing from a recovery that was built for a different phone is a fast way to a boot loop.

Step 1 - unlock the bootloader if it is not already done

Everything here needs an unlocked bootloader. If yours is locked, that job comes first, and it wipes the phone. Do it before you back up, not after, or you will be doing the backup twice.

Step 2 - set up the PC side properly

Install the ADB and fastboot driver, plug the phone in, and confirm fastboot sees it. This is the step people rush and then blame the ROM for. If your PC cannot see the phone, nothing further is going to work.

Step 3 - flash the recovery

Install the recovery that matches the POCO X7 Pro. Boot into it and take a moment to check that data is mountable and the screen responds. If the recovery is glitchy, stop and sort it out now, because you are about to trust it with a full ROM install.

Step 4 - format data before flashing

Format data in recovery first. Ports almost always need a clean start, and dirty data is the number one reason a port boots to a loop or hangs on the logo. Format it, do not just wipe.

Step 5 - install the HiOS port package

Flash the port package from the recovery and leave the phone alone until it finishes. Do not unplug the cable mid-install, and do not panic if the progress bar seems slow. When it is done, that is the ROM written.

Step 6 - reboot to system

Choose reboot to system and let it run. The first boot on a port takes longer than a normal ROM, so give it time before you decide something went wrong. Set the phone up from scratch when it comes up.

Where people get stuck

• Skipping the data format. Ports want a clean start. Dirty data means a loop, and the loop is not the ROM's fault.
• Flashing the wrong vbmeta. If your package ships a vbmeta, use that one. Borrowing a vbmeta from another build is a boot loop waiting to happen.
• Unplugging mid-install. It looks finished. It is not. Interrupting the write is how a clean flash turns into a repair job.

One honest paragraph

The bit I find genuinely annoying about ported ROMs is the polish gap. HiOS looks different and that is the point, but it was built for another phone, so the occasional app will behave oddly and some camera or battery features will not be there. Go in expecting a change of scenery, not a flawless flagship build, and you will enjoy it a lot more. Keep your stock ROM files somewhere safe so going back is easy if the port is not for you.

If you would rather not fight the driver setup before you even start, the free Rom Flasher tool handles the ADB and fastboot driver part for you. It is free, and the link is in the downloads section next to the port files.

Full description from the video

This port puts the HiOS interface from the Tecno Pova line onto the POCO X7 Pro — a completely different look from HyperOS, and a fun one to try.

If you've been bored of the same launcher and notification shade, a port ROM is the quickest way to shake that up. HiOS brings its own app drawer, its own control centre and its own set of stock apps, so the phone genuinely feels like a different device in your hand. Ported ROMs are also the kind that punish you for rushing — the flashing itself is easy, getting the setup right is where people stumble.

You'll need a PC, the correct driver and the usual flashing tools before you touch anything. Make a backup. If this is your first port ROM, don't skip that part — going back to stock after a rough flash is a lot more work than a five-minute backup.

📱 Device : POCO X7 Pro

🧩 ROM : HiOS (Tecno Pova port)

⚙️ Type : Ported custom ROM

🧩 What This Port Brings

• The HiOS launcher and app drawer instead of HyperOS
• A different control centre and notification layout
• Tecno's stock apps sitting alongside Google's
• A genuinely fresh feel for anyone tired of the usual Xiaomi software

🛠️ What You Need

• ADB and Fastboot driver installed on your PC
• Platform Tools, extracted and ready
• TWRP or OrangeFox recovery for the POCO X7 Pro
• vbmeta for AOSP-based builds if your package asks for it
• A full backup and a charged battery

📝 Steps

1. Unlock the bootloader if it isn't already done.
2. Install the driver, plug in, and confirm fastboot detects the phone.
3. Reboot to recovery and format data before flashing.
4. Install the HiOS port package and wait until it finishes.
5. Reboot to system and set the phone up from scratch.

⚠️ Where People Get Stuck

• Skipping the data format — ports almost always need a clean start.
• Flashing the wrong vbmeta and landing in a boot loop.
• Unplugging the cable in the middle of the install.

❓ Common Questions

• Do I need an unlocked bootloader? Yes, there's no way around it.
• Will this wipe my data? Assume it will and back everything up first.
• Can I go back to HyperOS? Yes, if you keep a copy of the stock firmware.

Common questions

More for POCO X7 Pro